With eight PTFE impregnated bearing pads and a hard coat anodized load beam, PneuMoment™ actuators are capable of moving loads up to 800 lbs. and moments up to 7000 in-lbs. (application and bore size dependent). No lubrication is needed for the bearings, although standard air line lubrication should be used to enhance the actuator’s seal life.
- Bore sizes: 27mm, 38mm, 50mm, 63mm
- Standard stroke lengths: 150mm (Custom stroke lengths available to 762mm)
- Maximum operating pressure: 150 psi
- Auxiliary ports transmit air or vacuum through the actuator to operate automation devices
- Available in U.S. customary units (inch) or metric
- Built-in track for position sensing switches